Frédéric Pautz, Directeur des Jardins botaniques du Grand Nancy et de l’Université de Lorraine, retrace l'évolution et l'adaptation des plantes à fleurs, au cours de journées botaniques Quand les plantes se font la malle 2022, à la Médicée : https://inv.nadeko.net/watch?v=3iwFupYh0io
Frédéric Pautz, Directeur des Jardins botaniques du Grand Nancy et de l’Université de Lorraine, retrace l'évolution et l'adaptation des plantes à fleurs, au cours de journées botaniques Quand les plantes se font la malle 2022, à la Médicée.
Die #Rose im Beet hat im Moment alles gleichzeitig: 🌹 volle Blüten, 🌱 neue Blütenknospen und 🍂 vertrocknete Blüten, auf denen die Reiswanzen sitzen und saugen.
I had a working wireguard peer on my laptop, which I didn't want anymore, so I decided to uninstall wireguard. All was well until I restarted the laptop and now I can't access the internet anymore.
I think it's because of some config left over from wireguard, but I'm not sure how to fix it.
I would look at your interface configuration and your routing, ip addr show, netstat -nr and go from there. Also might check iptables, iptables -L -n and make sure there aren't any iptable rules blocking your access.
can show you how far your connection request gets (whether it's blocked by your pc, your router, or somewhere on the internet). You may have to install it first.
@anytimesoon @CameronDev It should be as both commands do more or less the same thing, the question is your default route correct and are there any other routes that might be misdirecting your data.
I'm not entirely sure which of the list is the default route is, but absolutely see my WiFi router on the list. Took a picture as recommended by @CameronDev
@anytimesoon The 192.168.1.0 route looks problematic since your default is within that you should not need that route and it may be causing issues. I would try deleting that route.
This is what mine looks like for contrast: 0.0.0.0 50.251.249.54 0.0.0.0 UG 0 0 0 bridge0 50.251.249.48 0.0.0.0 255.255.255.248 U 0 0 0 bridge0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
In my case, 50.251.249.54 is my gateway and .48 my broadcast. I am static routed so no NAT.
@anytimesoon With that different router, now try a traceroute 1.1.1.1, if you get a response from the first hop, 192.168.1.1, then something is wrong with the NAT on the router or your cable service or fiber or whatever it is, is not working.
@anytimesoon I'm a bit at a loss then. I do have a Comcast router that is weird in that ARP only works at boot time so if I plug a new device into it, it won't route for that device unless I reboot it.
Did you remove wireguard the meta package or everything wireguard installed? I don't know Pop but other distros install additional tools and configs like wireguard-dkms.
Also, if possible, after completely purging every wg you could try booting into a previous kernel on your system to see if that changes anything.
Der Schock der US-Wahl ist gesellschaftspolitisch noch keineswegs verarbeitet. Was wird sich Trumps disruptiver Politik entgegenhalten lassen? https://taz.de/!6048127
Also du brauchst einen Webserver (am Besten Apache2, aber Konfigurationsbeispiele für nginx und lighttpd gibt es für Friendica auch), MariaDB, PHP (Version 8 oder später) und die Möglichkeit Hintergrundprozesse mittels crontab oder systemd zu starten.
Hilfreich ist ein funktionierendes eMail Setup auf dem Server, wobei du auch ein Addon verwenden kannst um einen anderen Mailserver zu benutzen.
If you’d rather try one of the other books on the voting list (particularly Kiss Her Once for Me by Alison Cochrun, the close second and the more Christmas-y pick if that’s your thing), or talk about a different book you’re reading as well or instead, feel free to use the tags for those too. We’re all about sharing the queer romance book love.
If you’d rather try one of the other books on the voting list (particularly Kiss Her Once for Me by Alison Cochrun, the close second and the more Christmas-y pick if that’s your thing), or talk about a different book you’re reading as well or instead, feel free to use the tags for those too. We’re all about sharing the queer romance book love.
I am the current coordinator of the Queer Romance Club (QRC). Boost this post to be updated on each month's pick (I don’t think just liking it works to receive edit notifications), or find it pinned on my profile.
QRC is open to all, read at your own pace over the month and post about it under #QueerRomanceClub and @queerromanceclub — CW for spoilers if going into details but general observations can be open.
No rules: let’s hear reactions, theories, reviews, favourite quotes etc, any time throughout the month or indeed whenever you happen to read it 😊
Note we’re also open to free choice selections, so if you’d rather post comments about a different book you’re reading as well or instead, feel free to use the tags for those too. We’re all about the queer romance book love.
Previous selections for 2024:
Rules for Ghosting — Shelly Jay Shore Sept: Lady Eve’s Last Con — Rebecca Fraimow Aug: Dionysus in Wisconsin — EH Lupton Jul: Sword Dance — AJ Demas Jun: A Marvellous Light — Freya Marske May: Iron Widow — Xiran Jay Zhao Apr: Slippery Creatures — KJ Charles Mar: The Hellion's Waltz — Olivia Waite Feb: How to Find a Princess — Alyssa Cole Jan: Even Though I Knew the End — CL Polk
The xev output for both left alt and right alt is given below. I could not use right alt for any purpose due to this. What could be the problem? Thanks in advance.
KeyPress event, serial 39, synthetic NO, window 0x1400001,
root 0x409, subw 0x0, time 14963499, (139,64), root:(818,407),
state 0x10, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 39, synthetic NO, window 0x1400001,
root 0x409, subw 0x0, time 14964219, (139,64), root:(818,407),
state 0x18, keycode 108 (keysym 0xfe03, ISO_Level3_Shift), same_screen YES,
XKeysymToKeycode returns keycode: 92
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
it was all disabled for me. So now i i=enabled it and choose the option "Right alt never chooses the third level" and now it works. What actually is the third, second and fifth levels? And why is it enabled even if the entire setting to choose 3rd level key is disabled?
Anyway this solved my issue but still curious on what thoose levels in keyboard are
What keyboard layout are you using? It might be set as default there. Those extra levels change the keys on your keyboard to produce extra symbols, like shift+a produces A, shift3+a might produce å (as it does on my keyboard layout).
OOOOh so thats what it is for.. How could i see different levels and assigned keys?
Also I dont exactly know what keyboard layout i am using. It's my laptop's keyboard, with two hp specific keys, numpad, and no menu button or pause break button; if that helps
Yes, it depends on the layout. For example, I use the “English (Macintosh)” variant of the US layout. It has bindings for level 3 shift on all keys pretty much.
I also now set it to macintosh variant. But can I assign it to right shift instead of alt? I need the alt but there seems to be no option for using shift
It doesn't seem to be available as part of the standard modifiers. You can probably have it as part of a custom layout, but I have no idea about how to do that.
As far as I understand those selectors work, using shift as the level 3 modifier is a bad idea since ....
level
combination
1
key
2
SHIFT + key
3
L3 + key
4
SHIFT + L3 + key
5
L5 + key
6
L5 + SHIFT + key
I suppose customizing the keyboard layout such that SHIFT can be used as L3 modifier can be done. Otherwise, you might want to refer to /usr/share/X11/xkb/rules/evdev.lst.
Here's the relevant part(s):
option group:option
description
lv2
Key to choose the 2nd level
lv2:lsgt_switch
The "< >" key
lv3
Key to choose the 3rd level
lv3:switch
Right Ctrl
lv3:menu_switch
Menu
lv3:win_switch
... toon meer
As far as I understand those selectors work, using shift as the level 3 modifier is a bad idea since ....
level
combination
1
key
2
SHIFT + key
3
L3 + key
4
SHIFT + L3 + key
5
L5 + key
6
L5 + SHIFT + key
I suppose customizing the keyboard layout such that SHIFT can be used as L3 modifier can be done. Otherwise, you might want to refer to /usr/share/X11/xkb/rules/evdev.lst.
Here's the relevant part(s):
option group:option
description
lv2
Key to choose the 2nd level
lv2:lsgt_switch
The "< >" key
lv3
Key to choose the 3rd level
lv3:switch
Right Ctrl
lv3:menu_switch
Menu
lv3:win_switch
Any Win
lv3:lwin_switch
Left Win
lv3:rwin_switch
Right Win
lv3:alt_switch
Any Alt
lv3:lalt_switch
Left Alt
lv3:ralt_switch
Right Alt
lv3:ralt_switch_multikey
Right Alt; Shift+Right Alt as Compose
lv3:ralt_alt
Right Alt never chooses 3rd level
lv3:enter_switch
Enter on keypad
lv3:caps_switch
Caps Lock
lv3:caps_switch_capslock_with_ctrl
Caps Lock; Ctrl+Caps Lock for original Caps Lock action
lv3:bksl_switch
Backslash
lv3:lsgt_switch
The "< >" key
lv3:caps_switch_latch
Caps Lock; acts as onetime lock when pressed together with another 3rd-level chooser
lv3:bksl_switch_latch
Backslash; acts as onetime lock when pressed together with another 3rd level chooser
lv3:lsgt_switch_latch
The "< >" key; acts as onetime lock when pressed together with another 3rd level chooser
lv5
Key to choose the 5th level
lv5:caps_switch
Caps Lock chooses 5th level
lv5:lsgt_switch
The "< >" key chooses 5th level
lv5:ralt_switch
Right Alt chooses 5th level
lv5:menu_switch
Menu chooses 5th level
lv5:rctrl_switch
Right Ctrl chooses 5th level
lv5:lsgt_switch_lock
The "< >" key chooses 5th level and acts as a one-time lock if pressed with another 5th level chooser
lv5:ralt_switch_lock
Right Alt chooses 5th level and acts as a one-time lock if pressed with another 5th level chooser
lv5:lwin_switch_lock
Left Win chooses 5th level and acts as a one-time lock if pressed with another 5th level chooser
lv5:rwin_switch_lock
Right Win chooses 5th level and acts as a one-time lock if pressed with another 5th level chooser
In a secret chamber buried deep within Earth's outer core, a gigantic robot named Unix is counting to 2.15 billion. There he has sat undisturbed since January 1, 1970. Unix is up to 1.7 billion. He's very tired, but he must count. One day, 14 years from now, he will have counted to the highest number imaginable. Boiling water will no longer make steam. The moon will emit a Glow That Is Not Light. Out of volcanoes, the winged beasts will emerge. And Unix will finally know what it is to rest
With Pacific Waterproofing and Restoration in Vancouver, WA, you can keep your home secure from water damage and its dangerous side effects. We provide powerful water restoration solutions as well as waterproofing for peace of mind in the long-term. Request more information about Pacific Waterproofing online.
Plus de 300 pages de preuves du #CDC : Les #vaccins provoquent l'#autisme !
Steve Kirsch a publié plus de 300 pages de documents internes du CDC prétendant montrer que l'agence connaît le lien entre les vaccins et l'autisme depuis plus de 20 ans.
E-mails internes, notes manuscrites et enregistrements vocaux inclus.
Les preuves suggèrent que le CDC a intentionnellement supprimé les données montrant ce lien.
Kirsch prévoit de transmettre l'information aux médias grand public afin de mettre la vérité en lumière.
Et donc une question idéale pour un dimanche : c'est bien les yaourtières ? (j'ai la place mais je ne voudrais pas accumuler un énième appareil inutilement)
Dans son livre « Jusqu’au bout », le sociologue Nicolas Renahy partage le quotidien d’ouvriers retraités de l’est de la France qui jouent un rôle central dans les luttes sociales et contre l’extrême droite.
En prenant ma douche je me suis demandé ce qu'on pouvait mettre comme hypothèse supplémentaire sympa pour qu'une fonction qui vérifie ∀x, f(x+1)=2f(x) soit forcément 2^x et, ce qui montre que l'âge c'est terrible, je n'ai pas trouvé.
Annie Ernaux, Jean-Marie Gustave Le Clézio, Orhan Pamuk, Wole Soyinka, Prix Nobel de littérature, Salman Rushdie, Peter Sloterdijk… Ils s’associent à notre appel, rédigé par le Prix Goncourt Kamel Daoud, pour la libération de l’écrivain.
Des appels lancés sur des médias principalement privés (Libération, Le Monde, FB, instagram) mais aucune source réellement accessible sans raquer leur purin d'abonnement ou se faire racketter les données.
Malgré le constat alarmant du Conseil National de la Protection de la Nature, plus aucun écho dans les médias de cet accaparement des terres à des visées industrielles.
Et la pauvre pétition de l'Assemblée plafonne péniblement à 880 signatures / 100.000 souhaitées 😡😡
... toon meer
Des appels lancés sur des médias principalement privés (Libération, Le Monde, FB, instagram) mais aucune source réellement accessible sans raquer leur purin d'abonnement ou se faire racketter les données.
Malgré le constat alarmant du Conseil National de la Protection de la Nature, plus aucun écho dans les médias de cet accaparement des terres à des visées industrielles.
La COP 16 concernant le déclin de la biodiversité mondiale était organisée en Colombie par l’ONU et s’est achevée le 1er novembre 2024. La tendance reste irrémédiablement la même : pied au plancher vers le pire.
